Pressure Washing Services in California
Pressure washing in California clears the algae, oil, rust spots, dust and ash that build up on driveways, brick, fences and pool decks. Fast Pro matches the pressure to each surface, keeps wash water out of the storm drain, gives you a free quote first, and walks the job with you before we leave.
California exterior problems, and what causes them
California runs from foggy coast to dry desert, and each place leaves a different mark. Here are the six we get called about most.
Algae on shaded concrete and fences
Fog and damp coastal air can keep shaded walls, fences and concrete wet for long stretches, and algae follows. A soft or low-pressure treatment kills it at the root so it does not grow straight back.
Oil and tire marks
Oil soaks into porous concrete, so a plain rinse leaves a shadow. We pre-treat the stain first and tell you honestly what to expect.
Mineral and rust spots from sprinklers
Hard or iron-rich sprinkler water leaves white and orange spots on concrete, brick and walls. Los Angeles' own water utility classes much of its supply as hard. Cleaning lifts the spots, but they return until the spray is redirected.
Dust, grit and wildfire ash
Wind-blown dust settles on driveways and patios. After a fire, county health agencies say to use as little water as possible, never dry-sweep or use a leaf blower, and keep ash out of storm drains.
White haze on pavers and brick
That powder is usually efflorescence, salt left behind as moisture moves through the masonry. PROSOCO says it may reappear as the material keeps drying.
Slick pool decks and patios
Algae and sunscreen film turn a deck slippery. We clean the surface, and protect the water and plants before we start.
The surfaces we clean with pressure in California
Pressure for hard surfaces that can take it, lower settings for the ones that can't.
Concrete driveways and walks
A rotary surface cleaner gives an even finish with no wand stripes.
Brick steps, walls and borders
Lower pressure after a test spot. The Brick Industry Association says to keep nozzle pressure at or below 400 psi.
Pavers and flagstone
A lower setting, then a check on the joint sand. No single pressure suits all natural stone, so we test first.
Redwood and cedar fences
Low pressure, a soft approach and no wire brushes, which can leave metal stains in the wood.
Pool decks and cool decks
Slip-prone surfaces cleaned, with the water and plants protected first. Ask us before we wash a coated deck.
Retaining walls and block
Pressure matched to the material, with old mortar and paint checked before we start.
Pressure washing built around California weather, water and rules
California is not one climate. The coast stays damp and foggy, the valleys and Inland Empire run hot and dusty, and every region has its own water supply. What we use on a mildewed fence in Santa Cruz is not what a dusty driveway in Riverside needs.
Our rule is to use the gentlest method that gets the surface clean. That means pressure for concrete and sturdy surfaces, and a soft wash for stucco, siding and roofs. It protects your brick, your paint and your roof, and it lasts longer than blasting at growth with a nozzle.
Wash water gets special attention here. Cities and counties across California say it must not reach the storm drain, and we plan every job around that. We also check your supplier's water rules before we book.
Storm drain rules
San Diego says wash water must be contained, captured and disposed of properly, whether the work is done by an owner or a contractor.
Wildfire ash
County health agencies say to use little water, never use a leaf blower, and keep ash out of storm drains.
Hard water
LADWP's report classes Colorado River supply as hard. Sprinkler overspray leaves mineral spots that return until the spray is redirected.
Coast to desert
Fog and shade grow algae on the coast. Inland, dust and sun are the bigger problems.
Why California homeowners call Fast Pro for pressure washing
Plenty of companies list this as one line on a long menu. Here is what you get when you call us.
The right method for each surface
Pressure for concrete. Soft wash for roofs, siding and stucco. Hand washing for glass. We tell you which one we're using and why.
A free quote before we start
You hear the price and what drives it before any water goes on. If the job changes on site, we tell you first.
Licensed and insured
Ask for proof of insurance with your quote and we'll send it.
Plants and property protected
We wet down plants, cover outlets and check seals and loose siding before we begin.
A walkthrough before we leave
The crew lead walks the job with you. Anything that looks off gets fixed then, not next week.
Satisfaction guarantee
If a spot doesn't look right after the job, call us and we come back to fix it at no charge.
From first call to final rinse, in four steps
The same process whether you're in San Diego or Sacramento.
Call us
Tell us what you want cleaned, the address and what's bothering you. We confirm we cover your area.
Get a free quote
We ask about the surface and size, then explain the price and the method before any work begins.
We clean it
The crew protects plants and outlets, tests a small spot, and washes with the method we agreed on.
Walk it with us
We go over the job together, rinse the walkways and leave the site as we found it.
Inside a Fast Pro pressure washing visit
Whether it is a driveway in Irvine or a patio in Sacramento, the visit follows the same sequence.
Pressure Washing across California
Find your area below. If it isn't listed, call us and we will tell you right away.
Not sure we cover your block? Call us and we will confirm.
How we match the method to the surface
These are the limits we work to, and who sets them.
Method by surface
Sources: Brick Industry Association (Technical Note 20), PROSOCO, California Redwood Association, Sto Corp., ARMA, GAF technical bulletin R-102, Andersen, PGT, Milgard, Travertine Mart.
Pressure washing or soft washing?
The surface decides. This is how we split the work.
Pressure washing fits
- Concrete driveways, walks and garage floors
- Patios and walkways
- Sturdy fences and retaining walls
- Brick steps and borders, at a lower setting
Soft washing fits instead
- Asphalt shingle and tile roofs
- Stucco, fiber cement and vinyl siding
- Painted wood and trim
- Anything with a coating we need to protect
Not sure which your surface needs? Call us and describe it.
What goes into a California pressure washing quote
We quote every job by phone, because a lightly dirty driveway and a mildewed brick wall are different jobs. These are the factors we weigh.
Surface and size
Square footage and the material set the base price. Pavers take longer than plain concrete.
How much growth
Light algae is a short job. Years of buildup take more time and solution.
Access and runoff control
Slopes, tight gates and nearby storm drains change how we set up to contain wash water.
Stains and add-ons
Rust and oil need their own treatment. Tell us about them when you call.
Call for a free quote. Tell us the surface, the size and the problem. We will explain the price and the method before any work starts.
Call 813-536-7337Scheduling and coverage
Do you serve all of California?
We work across the state, including the Bay Area, Los Angeles, Orange County, the Inland Empire, San Diego, the Central Coast and the Sacramento and San Joaquin valleys. Call with your address and we will confirm coverage and the soonest opening.
How soon can you come out?
Call early in the day and we will give you the soonest slot we have. We will tell you plainly if the schedule is full.
What happens if it rains?
Light rain does not stop an exterior job. Storms and high wind do. We reschedule at no charge and let you know the same day.
Do I need to be home?
No, as long as we can reach the exterior and an outdoor spigot. Please close windows, move cars and bring in small items.
Methods and safety
What is the difference between pressure washing and soft washing?
Pressure washing uses force to blast dirt off hard surfaces like concrete. Soft washing uses a cleaning solution and a gentle rinse, which suits roofs, stucco and siding. Many jobs use both.
Can you pressure wash stucco?
We soft wash it. Sto, a stucco finish maker, says to keep pressure at or under 500 psi on its acrylic finishes, and that higher pressure can destroy the finish. Older cement stucco gets a test spot first.
Can you pressure wash brick?
Yes, at a lower setting. The Brick Industry Association says to keep nozzle pressure at or below 400 psi, and not to use unbuffered acid. High pressure can erode mortar joints, so we test a small area first.
Will you pressure wash my shingle roof?
No. ARMA and GAF both advise against pressure washing shingles because it can strip the granules. We soft wash roofs with a low-pressure solution. See our roof cleaning service.
Pricing, insurance and water rules
Where does the dirty water go?
Not to the street or the storm drain. Cities and counties across California say wash water must be contained, and homeowners can be responsible for a contractor's discharges. We keep it out of the drain and follow your city's rules.
Can you clean wildfire ash from my driveway?
Heavy ash needs gentle, wet handling first. County health agencies say to use as little water as possible, never dry-sweep or use a leaf blower, wear an N95 or P100 respirator for larger cleanups, and keep ash out of storm drains. Call us before you rinse it anywhere.
How much does pressure washing cost in California?
It depends on size, material, how much growth or buildup there is and how easy the site is to reach. Call for a free quote and we will explain which of those drive your price.
Do California water and runoff rules affect the job?
Two rules apply. First, wash water must not reach the street or storm drain. San Diego, Malibu and Contra Costa County all say so, and Contra Costa adds that homeowners are responsible for a contractor's discharges. We keep wash water out of the drain and follow local rules. Second, water-use rules vary by supplier. The State Water Board says the statewide ban on hosing driveways expired in December 2023, and none was in effect as of June 2024, but local suppliers can be stricter. We check yours before we book.
Are you licensed and insured?
Yes. Fast Pro Pressure Washing is licensed and insured. Ask for proof of insurance with your quote and we will send it.
Do you guarantee the work?
Yes. If something does not look right after the job, contact us and we come back to fix it at no charge.
What customers say about Fast Pro
4.9 out of 5 average rating
“Fast Pro Pressure Washing did an excellent job on our house and driveway. The difference was honestly amazing—the concrete looked almost new again, and they were careful around our landscaping. The crew arrived on time, explained everything clearly, and cleaned up before leaving. I would definitely recommend Fast Pro to anyone looking for a reliable pressure washing company in Florida.”
“I hired Fast Pro Pressure Washing to clean our driveway, walkway, and exterior of the house. They were professional from start to finish and paid attention to all the little details. The stains and buildup that had been there for years came off much better than I expected. Great communication, fair service, and a very noticeable difference. I’ll definitely use them again.”
“Fast Pro Pressure Washing made our home look completely different. The team cleaned the siding, driveway, and patio and did a fantastic job without making a mess around the property. Everyone was friendly and professional, and the whole process was easy from getting the estimate to finishing the job. Very happy with the results and would recommend them to other homeowners in California.”
Other exterior cleaning services in California
While the crew is on site, ask about any of these too.
House Washing in California
See house washingRoof Cleaning in California
See roofWindow Cleaning in California
See windowDriveway & Patio Cleaning in California
See driveway and patioPressure Washing in other states: California · Texas · Ohio · New Jersey.
Ready for pressure washing in California?
Call us, describe the job and get a free quote. We will tell you which method your surface needs before anything gets wet.
4.9/5 from 1,000+ completed jobs